
252 IBM BladeCenter JS23 and JS43 Implementation Guide
6.1 LAN console This IP address on the LAN is used to allow the 5250
console to connect to the VIOS using the IBM
System i Access for Windows software.
6.1 production interface This IP address on the external LAN is used to
provide 5250 production network access. This
address will be configured after 6.1 is installed using
LAN console. It is recommended that the 6.1 LAN
console and production network interface use two
separate Virtual Ethernet adapters in the 6.1
partition.
PC for LAN Console When the System i for Windows LAN console is first
established, the PC console must be on the same
subnet as the 6.1 partition. After the console is
established, this restriction is removed.
7.1.6 Storage consideration BladeCenter H
An IBM BladeCenter JS23/JS43 Express server installed in a BladeCenter H
chassis has no access to any physical devices in the BladeCenter H chassis.
Storage must be provided by attaching LUNs on a SAN to the VIO Server. The
VIO Server provides a virtualized access from IBM i on the JS23/JS43 to the
LUNs.
For detailed information about how to define a SAN environment for an IBM
BladeCenter JS23 or JS43 blade installed in a BladeCenter H chassis using LUN
attached disks to install IBM i 6.1, refer to:
http://www.ibm.com/systems/power/hardware/blades/i_on_blade_readme.pdf
7.1.7 Disk consideration in BladeCenter S
This section describes the configuration environment used in this chapter to
install IBM i 6.1 on an IBM BladeCenter JS23/JS43 Express server in a
BladeCenter S chassis.
IBM i 6.1 running on an IBM BladeCenter JS23/JS43 Express server does not
have physical access to storage or other devices; instead, the hardware does.
Every hardware device is provided to the IBM BladeCenter JS23/JS43 server as
a virtual device using the Integrated Virtualization Manager (IVM) functionality.
Note: When you configure LUNs for IBM i, configure them as 512-byte AIX
LUNs, not as 520-bytes IBM i LUNs.
Komentarze do niniejszej Instrukcji