E-Tech ET8 Instrukcja Instalacji Pobierz pdf (Strona 52)

PROGRAMMING

E-TECH ET8 (V4) CONTROL PANEL – INSTALLER MANUAL

REQUIRED RINGS

Sets the number of double-rings before an incoming call is answered. This is

used for Remote Access.

Programmable from 1 to 16 rings. Enter a value between 1 and 16.

See below for a detailed description.

PROGRAMMING SEQUENCE:

P91E existing Required Rings value is displayed

[ENTER NEW VALUE] E new Required Rings value is displayed

EXAMPLE: To make Required Rings = 3:

P91E3E

P91E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

NOTES:

• RELATED OPTIONS:

P90E 1E to 8E (All Remote Access

options)

OPTION No DESCRIPTION DEFAULT NOTE

P91E Required Rings to answer 1

SEND DIALLER TEST REPORT

Send a Dialler Test Report in USER PROGRAM MODE. Obviously, at least one telephone

number must be programmed (P70E).

PROGRAMMING SEQUENCE:

P66666666E (eight 6’s) Triggers dialler and sends test report to Central Station

P66666666E

PROGRAM MODE LEVEL:

User Program Mode

FACTORY DEFAULT:

[not applicable]

SIREN TEST

Turn the Siren, Reset and Strobe Outputs On. Pressing P E will stop the Siren Test (and also

exits Program Mode).

PROGRAMMING SEQUENCE:

P77777777E (eight 7’s) Triggers Siren, Reset, Strobe

P77777777E

PROGRAM MODE LEVEL:

Installer, User Program Mode

FACTORY DEFAULT:

[not applicable]

PANEL RESET

This function resets the microprocessor. The effect is the same as powering down and

powering up again.

PROGRAMMING SEQUENCE:

P88888888E (eight 8’s) Panel Reset

P88888888E

PROGRAM MODE LEVEL:

Installer, User Program Mode

FACTORY DEFAULT:

[not applicable]

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 63 64

Komentarze do niniejszej Instrukcji

Brak uwag

E-Tech ET8 Instrukcja Instalacji Strona 52

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa E-Tech ET8