E-Tech ET8 Instrukcja Użytkownika Pobierz pdf (Strona 16)

E-TECH ET8 V4 CONTROL PANEL - USER MANUAL

RADIO KEY OPERATION

E-TECH RADIO KEY 3 BUTTON

The optional E-Tech Radio Key allows you to Arm, Disarm and

activate PANIC. The Radio Key can also Arm Monitor Mode, (if this

has been enabled by your installer).

ARMING

Press the ON button.

• The keypad will give 3 beeps.

• The outside siren will give 1 ‘chirp’. (If enabled by your installer)

• The strobe light will flash briefly

DISARMING

Press the OFF button.

• The keypad will give 3 beeps.

• The outside siren will give 3 ‘chirps’. (If enabled by your installer).

• The strobe light will flash briefly.

ARMING MONITOR MODE

Press the OFF button twice within 4 seconds.

• The keypad will give 9 beeps.

• The outside siren will NOT ‘chirp’.

• The strobe light will flash briefly.

PANIC

Press and hold the PANIC button for at least 4 seconds.

• The siren and strobe will activate, (If enabled by your installer)

• The dialler will report a Panic alarm, (If enabled by your installer

and if your system is monitored by a central station).

Press the OFF button to reset a Panic alarm

* The E-Tech Radio Key is optional and is not supplied with any E-Tech control panels as standard

* E-Tech radio products require a E-Tech Radio Interface (100-200) to be fitted to the control panel.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Brak uwag

E-Tech ET8 Instrukcja Użytkownika Strona 16